What Are The Names Of The Mold Temperature Controller?

When it comes to the mold temperature control machine, many people may not understand what the editor is talking about, but if it comes to the mold temperature control machine, I believe many people know what the editor is talking about.

The mold temperature machine can be called in many ways, such as: electric heating heat conduction oil furnace, electric heating heat conduction oil device, electric heating cabinet, heat conduction oil furnace, heat conduction oil device, oil temperature machine, water temperature machine, etc., although each name is They are all different, but the ultimate goal is to control the temperature!

The mold temperature machine is composed of water tank, heating and cooling system, power transmission system, liquid level control system, temperature sensor, injection port and other devices. Typically, a pump in the power transmission system moves the hot fluid from a tank with built-in heaters and coolers to the mold and from the mold back to the tank; a temperature sensor measures the temperature of the hot fluid and transmits the data to the control section. The controller; the controller regulates the temperature of the hot fluid, thereby indirectly regulating the temperature of the mold. If the mold temperature machine is in production and the mold temperature exceeds the set value of the controller, the controller will open the solenoid valve and connect the water inlet pipe until the temperature of the hot fluid, that is, the temperature of the mold, returns to the set value. If the mold temperature is lower than the set value, the controller will turn on the heater.

The heat transfer oil heating unit is a new type of environmentally friendly thermal energy conversion equipment. It uses electricity as energy and converts electrical energy into heat energy through electric heating elements; it uses organic heat carrier (heat transfer oil) as heat transfer medium, and heat transfer oil is passed through the high temperature oil pump in the system. Forced circulation is carried out to make it heated again and again, so as to achieve the purpose of continuously obtaining the required heat energy for the heat-demanding equipment; it can also meet the process temperature set in the production process and the requirements of high-precision temperature control.