Knowledge

How to Reduce Freeze Drying Time

How long does a freeze dryer take to freeze things? Generally, the freeze-drying time ranges from ten to forty hours, and the freeze-drying time varies with different products. Because the freeze-drying process is actually a process of heat transfer and mass transfer (water vapor) at the same time, the heat and mass transfer rates together affect the drying rate, thereby affecting the entire freeze-drying cycle. All factors that affect heat and mass transfer will affect drying. The rate, a simple analysis is as follows:

1. Form and composition of materials

The form of freeze-dried material is usually divided into solid and liquid. The morphology of the solid and the concentration of the liquid have a great influence on the freeze-drying rate.

2. Pre-freezing rate

The size of the crystals formed upon freezing greatly affects the rate of drying and the dissolution rate of the dried product. The process of quick freezing and slow freezing has the following differences: the ice crystals produced by quick freezing are smaller, and the ice crystals produced by slow freezing are larger. Large ice crystals are beneficial to sublimation, while small ice crystals are not conducive to sublimation. Fast freezing leads to a low sublimation rate and fast desorption rate; slow freezing leads to a fast sublimation rate and slow resolution rate.

freeze dried food



3. Loading capacity

When the material is freeze-dried, there is a certain ratio of surface area to material thickness after being sub-packed into the container, that is, freeze-drying is related to the loading amount. Small surface area and thickness are conducive to water sublimation, easy to freeze-drying, and ideal quality. When drying, the wet weight load per unit area of the tray is an important factor in determining the drying time. Generally, the thinner the thickness of the material stack, the faster the heat and mass transfer speed, and the shorter the drying time. However, if the thickness of the material is thin, there will be less material to be dried in each batch per unit freeze-drying area, which is not conducive to improving the unit freeze-drying area and the unit time output.

4. Drying indoor pressure

The pressure in the drying chamber affects the rate of heat and mass transfer. For mass transfer, the lower the pressure, the better, and for heat transfer, the higher the pressure, the better. The size of the mass transfer rate is mainly determined by the temperature and pressure of the sublimation interface and the surface of the drying layer. To improve the escape rate of water vapor in the drying layer, one is to increase the temperature of the sublimation interface to increase the interface water vapor pressure; two is to improve the vacuum degree of the drying chamber and reduce the vapor pressure on the surface of the drying layer.

5. Heat transfer method Heat transfer method

The traditional classification can be divided into conduction, convection, thermal radiation, and medium heating (microwave heating). Since the process of sublimation drying involves the transfer of heat and mass (steam), the drying rate is greatly affected by which heat transfer method is used to transfer the heat to the material more efficiently.


You Might Also Like

Send Inquiry